Protac Matt UV / FULL MATT 65cm x 25m
Protac Matt / FULL MATTE UV is deep matte overlaminating film for the photo protection and ennobling. Application ideally through roller laminator. Drytac Protac line of overlaminating films significantly extends the life of reproductions.
Protac Matt / FULL MATTE UV is deep matte overlaminating film for the photo protection and ennobling.
Application ideally through roller laminator. Drytac Protac line of overlaminating films significantly
extends the life of reproductions.
Drytac Protac Matt / FULL MATTE UV is matte PVC (vinyl) laminating film 75µ coated with 25µ solvent acrylic
adhesive. Matt UV is professional film eliminating any reflection and loss of color contrast and detail
is minimal. Indoor / outdoor applications, a high degree of UV protection.
Drytac Protac Matt / FULL MATTE UV is an polymeric PVC film with a ""hybrid cross-linked"" glue. Therefore
it is a qualitative peak among films for pressure-sensitive (cold) lamination. It does not cause silvering.
Benefits of high-grade laminating films:
- are extremely light (unlike the glass)
- between overlaminating film and image, dust and moisture don’t get (under glass yes)
- increased abrasion resistance and absolute waterproof
- high degree of protection against UV radiation and ozone O3 (against image fading)
Tool for laminating laminator .
Pre-heat is not necessary, because it is a luxury class of overlaminating films.
Recommendation:
• on laminator, set high pressure and low feed speed during laminating
• laminate fully settled (dried) photographs; recommended minimum delay after inkjet printing is 6 hours
• overlaminating film is usually slightly stretched during application (typically 1 mm per meter); from
that reason make final cut of laminated graphic at east after six hours (to let film re-shrink)
• ideal inkjet medium for subsequent lamination: FOMEI
Collection Chrome Film 215.
| Name | Value |
|---|---|
| Media type | PVC |
| Application | roller laminator (cold, pressure-sen |
| Format | roll 65,0 cm |
| Roll lenght | 25 m |
| Media surface | matte |
| Media texture | smooth |
| Media thickness | 100 µm |
| Film stickiness | permanent high (solven |
| Media usage | indoor & outdoor 6 months |
| Manufacturer | Drytac |
| Intended for | hobby & profi |
FOMEI záruka – 6 měsíců
Média, která si koupíte, jsou u nás uskladněna na klimatizovaném místě, tedy v prostředí s předepsanou teplotou a relativní vlhkostí. Tím je zamezena jejich degradace. Proto i v případě delšího uskladnění od výroby po expedici dostáváte vždy čerstvá média. Díky tomu vám celých 6 měsíců garantujeme bezvadnou kvalitu médií s konzistentní barevností vašich výtisků.
| Zacházení s médii pro inkoustové a termosublimační tiskárny | |
|---|---|
| skladovací podmínky (orig. obal) | 10-20°C, 40-60% RH bez kondenzace |
| pracovní prostředí | 15-25°C, 30-70% RH bez kondenzace |
| nejlepší tiskové podmínky | 19-23°C, 40-60% RH bez kondenzace |
| Při manipulaci s nepotištěným médiem používejte jemné rukavice. | |