65 cm x 25 m TwinTac 100µ - mounting adhesive
TwinTac is mounting adhesive for the pressure-sensitive (cold) mounting of photos. Ideal application is with roller laminator. TwinTac is suitable for sheet (low capacity) mounting, because it has the release paper on both sides (!). Indoor applications.
We have over 30 years of experience
We have over 30 years of experience
Take advantage of our specialists’ advice
Take advantage of our specialists’ advice
We will provide service for you throughout the product’s lifetime
We will provide service for you throughout the product’s lifetime
Do you need help?
Call: +420 603 587 902
Submit a question using the form
Call: +420 603 587 902
Recommended accessories
TwinTac is mounting adhesive for the pressure-sensitive (cold) mounting of photos. Ideal application is with roller laminator. TwinTac is suitable for sheet (low capacity) mounting, because it has the release paper on both sides (!). Indoor applications.
Drytac TwinTac consists of PVC carrier 50μ coated with permanent aqueous acrylic adhesive 25μ. Moisture resistant release paper 72gsm covers both sides (!).
Fair thickness and both sides release paper mean that TwinTac mounting adhesive is great for sheet applications, ensuring convenient handling and in addition slightly smooth rough structure out of the board on which the photo is mounted.
Drytac TwinTac is the most popular photo adhesive of the photo studios and graphic agencies, where the priority is routine or low-circulation production, i.e. sheet mounting of the pictures or photos. Thanks to mounting of the image on the board, the image is not wrinkling / twists even after years.
Tool for mounting: roller laminator.
Pre-heat is not necessary, because it is a luxury class of mounting adhesives.
For pressure-sensitive mounting of photos, you should use harder and moisture resistant boards. Recommended boards for photographic purposes:
• size up to A3: GatorFoam, Kapa Mount, Kapa Plast
• size up to A1 (60x90): GatorFoam
• size > A1: GatorFoam + solid frame, Dibond, MasterBond
Instruments for the boards formatting: cutting mat, steel ruler, snap-off knife.
| features: | Value |
| Media type | PVC |
| Application | by cold roll laminator |
| Format | roll 65,0 cm |
| Roll lenght | 25 m |
| Media thickness | 100 µm |
| Film stickiness | permanent standard (acrylic adhesive) |
| Self adhesive transparency | partially opaque |
| Media usage | indoor & outdoor 3 months |
| Manufacturer | Drytac |
| Intended for | hobby & pro |
I have a question about the product 65 cm x 25 m TwinTac 100µ - mounting adhesive
FOMEI Warranty – 6 Months
The media you purchase is stored in a climate-controlled environment, i.e., at the prescribed temperature and relative humidity. This prevents degradation. Therefore, even in the case of extended storage from production to dispatch, you always receive fresh media. Thanks to this, we guarantee flawless media quality with consistent print colors for a full 6 months.
| Handling of Media for Inkjet and Dye-Sub Printers | |
|---|---|
| Storage conditions (original packaging) | 10-20°C, 40-60% RH without condensation |
| Working environment | 15-25°C, 30-70% RH without condensation |
| Optimal printing conditions | 19-23°C, 40-60% RH without condensation |
| Use clean gloves when handling unprinted media. | |